| |
|
m |
|
TOOLS & PULLERS
(LUBRICATE
HEAVILY BEFORE USE) |
|
MODEL |
CAT # |
|
HONDA |
|
27MM X 1.0
LEFT HAND THREAD INTERNAL (MALE). FITS MOST OFF-ROAD AND
MOTOCROSS 2 STROKE. MODELS CR MXswws 80CC-CR500CC (LATE
MODEL), ATC250R 2 CYCLE ENGINES, ALL SMALL BORE 4 CYL.
80CC- 100XR & XL STREET ENDURO & MX, TRX250 &
FLZ50 ODYSSEY, 50CC- 110CC (1960'S-1970'S) |
018-1 |
|
KAWASAKI |
|
27MM X 1.0
LEFT HAND THREAD INTERNAL (MALE). FITS MOST OFF-ROAD AND
MOTOCROSS 2 CYCLE AND LATE 4 CYCLE MODELS KB75, MC190,
G4TP90, G4TH100, F6-125, F7-?75 ENDURES. KD80, KM1W,
KE100, KE125, KE175, KDX80, KDX200, KDX250, KDX 300 4
CYCLE, KX60, KX80, KX125, KX250, KX500. (SEE MP#43 24MM
FOR K50MX) THIS PULLER WILL ALSO FIT SOME 1960 AND SOME
190 VINTAGE 2 CYCLE STREET & TRAIL SMALL SIZE MODELS. |
018-1 |
|
SUZUKI |
|
27MM X 1.0
LEFT HAND THREAD INTERNAL (MALE). FITS MOST OFF-ROAD AND
MOTOCROSS MODELS. MODELS RM80, RM125, RM250, RMX250
(1988 & LATER), 250-500CC 2 STROKE 4 WHEEL ATV, QUADS,
EARLY 50, 70, 80, 90, 100, 120, 125 2 STROKE |
018-1 |
|
YAMAHA |
|
27MM X 1.0
LEFT HAND THREAD INTERNAL (MALE). (YM-01189)
(1960'S-1990'S) FOR LARGE FLYWHEEL MODELS, 2 STROKE 4
STROKE. MC & ATV 4 WHEEL APPLICATIONS AND OUTER ROTOR
C.D.I.. MOST OFF-ROAD AND MOTOCROSS 2 STROKE USE THIS
PULLER (EARLY MODELS.) ATV: YT125, YT175, YFM60, 80,
125, 200, 225, YFS200 BLASTER, YFZ350 BANSHEE MC'S:
AT125, CT175, DT250, RT360, SC500, IT200, YZ/MX250,
MX400, IT/YZ490, TT/XT500, YZ400MZ 4 CYCLE. |
018-1 |
|
KAWASAKI |
|
35MM X 1.5
RIGHT HAND EXTERNAL 1' INTERNAL DEPTH (FEMALE). MODELS
KLT160, KLT185, KLF300, KSS250 MOJAVE. FITS MOST 4 WHEEL
ATV'S AND 4 STROKE SINGLE MODELS WITH LARGE FLYWHEELS.
(SEE MP#29 FOR EXTRA DEPTH AND MP#8 30MM FOR SMALLER
DIAMETER) |
018-5 |
|
SUZUKI |
|
35MM 1.5
RIGHT HAND EXTERNAL 1' INTERNAL DEPTH (FEMALE). MODELS
LT250E, LT300E QUADS, GFS400 BANDIT, GS100W GG 1100 LATE
MODEL, DR250/350S DUAL/OFF-ROAD. (SEE MP#29 35MM X 1.5
3' DEPTH) |
018-5 |
|
KAWASAKI |
|
30MM X 1.5
RIGHT HAND EXTERNAL DEEP ARMATURE PULLER (FEMALE).
MODEL KLF300 4 WHEEL (SEE MP#29 35MM FOR EXTRA DEPTH AND
DIAMETER AND MP#14 30MM FOR SHALLOW DEPTH) |
018-8 |
|
SUZUKI |
|
30MM X 1.5
RIGHT HAND EXTERNAL 3' DEPTH (FEMALE). MODEL
LT160, LT230, LT230G, LT250E/S, TM125, TM250, TM400
EARLY MODEL MX, TS250 EARLY MODEL ENDURO (1970'S) (SEE
MP# 29 30MM X 1.5 1' DEPTH OR MP#29 35MM BY 1.5). |
018-8 |
|
HONDA |
|
16MM X 1.5
RIGHT HAND SPECIAL BOLT (MALE). MODELS 600R SERIES (LATE
MODELS), 700 NIGHTHAWK ATC 90S, ATC110, C175, C350,
CB350 4 CYCLE, C360, C400, CB500. CB550, CB650SC,
CM185T, CM200T, CMX250, CM450, CM250, CT90, SL175,
SL350, CR125MX (EARLY MODEL), CR250MX (MID 1970'S). (SEE
MP#19 14 MM FOR SMALLER APPLICATIONS) (SEE MP#18 FOR
LARGER APPLICATIONS) |
018-10 |
|
KAWASAKI |
|
16MM X 1.5
RIGHT HAND SPECIAL BOLT (MALE). MODELS KLT110, KLT200.
KLT250, EARLY MODEL KX125/250/420. S340. KH400, Z1A/B900
(1973-1975), EX250 NINJA, 250R, EX500A, EN500 VULCAN,
KZ900A4/A5 (1976-1977), KZ900B1 LTD. (1976), KZ1000A/B
(1977-1980), KZ1300A/B (1979-1980), GPZ550 NINJA
(1981-1985), ZX600, ZX750, GPZ750, GPZ1100, VN750
VULCAN. (SEE MP#18 18MM X 1.5 FOR LARGER SIZE. |
018-10 |
|
YAMAHA |
|
16MM X 1.5
RIGHT HAND INTERNAL SPECIAL BOLT (MALE). (YM-01080-A)
MODELS FRZ400 (1988-1990), XJ550H/J/K MAXIM (1981-1983),
XJ550FSH/FSJ/RK SECA (1981-1983), FJ600ULC/WNC
(1984-1985), FZ600S/SC/T/TCAJ/UC (1986-1988). FCR600
(1989 & LATER). XJ650G/H/J/K MAXIM (1980-1983), XJ650LH
MIDNIGHT (1981). XJ650 LJ/LK SECA TURBO (1982-1983).
XJ650RJ SECA (1982)XJ700N/NC/S/SC MAXIM (1985-1986),
FITS EARLY 2 CYCLE ELECTRIC START MODELS CLASSIC
(1960'S), FITS MOST 4 STROKE 4 CYLINDER MODELS (1980'S &
1990'S) |
018-10 |
|
HONDA |
|
14MM X 1.5
SPECIAL BOLT AND LENGTH INTERNAL (MALE). MODELS XR185,
XR200, XL125, XL185S, XL200, CB125, ATC200X, ATC200F,
BIG RED SX185S, CB125. |
018-19 |
|
20MM X 1.5
SPECIAL BOLT WITH HOLLOW CENTER INTERNAL (MALE) MODELS
CB400A/T (1978-1979), CB450SC, CM450,CMX450C, CX500TC,
CX650, GL500, GL650, MR250, NX250, PC800, VF700C (1987),
VT750C, VF800C, VF1100C, ATV250X, ATC250ES, ATC250SX,
TRX250X, TRX300X, TRX350X, CX500, GL500, GL650. (NOTE:
SEE MP#17 FOR AN ADDITIONAL HOLLOW BOLT) |
018-21 |
|
OIL
FILTER/CLUTCH SPANNER TOOL |
|
35MM X 1.5
RIGHT HAND EXTERNAL 3' DEPTH (FEMALE). LATE MODEL STREET
SINGLES. TWINS AND MULTI-CYLINDER MODELS 4 CYCLE QUADS:
LT250E. LT300E. GSF400 BANDIT. GS1100, LATE MODEL DR250,
DR350S DUAL/OFF ROAD. (SEE MP#8 30MM X 1.5) |
018-29 |
|
|
|
|
